Plain closures for the end of a grooved fire-water run
We supply plain grooved end caps for wholesale fire-water fitting orders. The cap closes the run through its matching coupling and seal. Actual pipe OD, cap profile and the selected coupling assembly identify the closure, with access retained for its accepted installation and later removal.
| Supplied cap | Plain closed grooved end cap |
|---|---|
| Mating pipe | Actual OD and accepted groove/coupling series |
| Retaining joint | Identified coupling housing, gasket and fasteners |
| Face configuration | Plain closure face |
| Finish | Selected coated surface |
| Service records | Selected closure assembly drawing and required product evidence |
The axial cap dimension is useful when checking space at a branch end or beside a wall.
| Nominal size (in.) | Pipe OD (mm) | Cap T envelope (mm) |
|---|---|---|
| 2 | 60.3 | 22 |
| 2-1/2 | 73.0 | 22 |
| 3 | 88.9 | 22 |
| 4 | 114.3 | 23 |
| 6 | 168.3 | 23 |
| 8 | 219.1 | 29 |
No matching specification. Clear the search to see every row.
Scroll sideways to see every column.
Victaulic No. 60 plain-cap reference, publication 07.01 Rev AP, June 2026. T is the axial cap dimension shown in that drawing. The selected offer retains its own cap, coupling and complete installed envelope.
The cap’s retained profile and the coupling keys are selected together. The accepted drawing identifies the cap body, engagement and gasket seat around the closed run.
The selected gasket retains its compound and profile for the actual fluid and operating conditions. Required fire-service records identify the supplied closure and coupling configuration.
Internal pressure acts on the closure’s projected area. The selected joint and line restraint are accepted for that duty, with supports and anchors defined in the piping design.
The complete closure includes the cap and coupling housing. The layout retains space around the bolt pads and beyond the closed face for tools and the prescribed removal sequence.
The system’s accepted service arrangement provides isolation, drainage and pressure verification before the closure is handled. Those functions are identified in the piping layout as separate equipment where required.
A planned extension retains a known end location, pipe OD and groove series. Its drawing includes enough working space to remove the closure and prepare the next joint.
The scheduled cap closes a defined run or branch end. Each location tag retains the actual OD and its coupling assembly so the receiving team can match the whole closure.
For a staged project, cap assemblies and later extension parts can be listed by release area. The site’s approved commissioning plan establishes when each closure is fitted or removed.
Checks cover the cap shoulder, groove region and gasket-contact surface against the accepted assembly. The closed face is examined for visible casting and handling damage.
The release list keeps the cap, coupling model and seal compound together. Bolt and nut quantities are checked against the selected joint kit.
Plain cap items retain their OD, finish and model reference. Any separately ordered closure equipment is listed by its own configuration and quantity.
Dividers separate cap faces and retained edges. The gasket stays clean beside its matched coupling hardware, clear of heavy contact loads.
The packing list distinguishes cap pieces from complete coupling kits. Each location’s takeoff keeps the required closure parts countable.
Our quote identifies the plain cap selection, requested coupling/gasket scope and required records. Quantities, finish, packing and shipment terms remain visible on those supply lines.
In the named reference drawing, T describes the cap’s axial envelope. Pressure-wall design and material acceptance follow the actual cap model and product specification; the installed layout uses the complete cap-and-coupling envelope.
The offer lists the cap and retaining coupling explicitly. A complete closure package identifies the cap piece, housing set, gasket, bolts and nuts so the receiving count matches the selected assembly.
The plain cap provides an end closure. A valve supplies the scheduled isolation function and operating access; the service layout retains that valve and the required pressure-verification arrangement.
The cap profile, gasket and coupling are selected for the specified pressure conditions, including any vacuum. The accepted model data identifies that closure configuration for the stated duty.
A drain or test point is supplied through a separately identified outlet fitting or accepted special closure arrangement. The plain cap listed here retains its closed face, and the quote keeps the additional connection on its own line.
Record the actual pipe OD, groove/coupling model and existing closure profile. The replacement offer matches those interfaces together with the gasket compound, finish and required project records.
Other items in the same product category.
Send the actual pipe ODs, cap quantities and location references with the coupling or groove series. Include fluid conditions, required project evidence and destination. We return the plain cap and requested joint-kit scope as an itemized wholesale offer.