Parallel-flange channels for flat fixing faces and defined assembly clearances
We supply UPE steel channels for fabrication and distributor orders that require flat inner flange faces. Each item retains the full UPE size, material grade and finished length. Prepared holes, notches and attached plates are quoted from the part drawing, with the channel opening and reference face kept consistent through the cut list.
| Product | Hot-rolled parallel-flange channel |
|---|---|
| Geometry | UPE series; full designation retained |
| Material | Ordered grade and material acceptance requirements |
| Cutting | Net lengths with stated end and datum requirements |
| Fabrication | Drawing-defined holes, notches and connections |
| Surface | Bare, primed or specified coating scope |
Use the parallel-flange UPE designation for the profile shown in each row.
| Section | Depth h (mm) | Flange b (mm) | Web tw (mm) | Flange tf (mm) | Nominal mass (kg/m) |
|---|---|---|---|---|---|
| UPE 100 | 100 | 55 | 4.5 | 7.5 | 9.8 |
| UPE 120 | 120 | 60 | 5 | 8 | 12.1 |
| UPE 140 | 140 | 65 | 5 | 9 | 14.5 |
| UPE 160 | 160 | 70 | 5.5 | 9.5 | 17.0 |
| UPE 180 | 180 | 75 | 5.5 | 10.5 | 19.7 |
| UPE 200 | 200 | 80 | 6 | 11 | 22.8 |
No matching specification. Clear the search to see every row.
Scroll sideways to see every column.
Selected nominal dimensions and steel mass from the ArcelorMittal section reference. Use the complete designation for profile geometry. Our quotation identifies the material grade, supplied lengths and quantities; the project design establishes member resistance and connection requirements.
UPE provides parallel flange faces. The rolled root fillets occupy part of the area beside the web; hole gauges use the remaining flat face and the actual fastening detail.
A UPE size establishes shape and nominal mass. The material standard and grade establish the required steel properties and documentation.
Channel depth, width, web thickness and flange thickness are used together when planning a connection. Structural resistance and deflection depend on the complete project design.
Fixing holes can be located from the part datum on a flat flange face. Edge distances, root clearance and access for the actual fastening tool remain part of the connection detail.
A notch can create an open end or seat for another member. The fabrication drawing specifies its position and contour on the chosen UPE profile.
The opening direction matters when channels form paired rails or a perimeter frame. Part marks distinguish mirrored components after cutting and surface treatment.
Flat inner faces support a designed bolted connection on a parallel bearing surface. The equipment load and connection drawing establish channel grade, reinforcement and fastening details.
A package can include opposite-handed channels and loose joining plates. Spacing, restraints and connectors define how those members work together; the supply list keeps them separate until assembly is included.
Depth, width and thickness checks identify the specified UPE profile. Receiving uses the complete series and dimensions to distinguish it from other channels.
Checks use the released drawing datum and hand. Where a part fits inside a channel, the required clear envelope is considered separately from its outside width.
Finish requirements identify any masked contact surfaces and the coating stage for dimensional acceptance. The resulting fit must reflect the actual finished surfaces.
Bundles retain the full UPE designation and length count. This helps receiving teams distinguish adjacent sizes whose open faces can look similar in a stack.
Dunnage supports the sections; separators keep prepared surfaces and projecting plates clear of bundle pressure. Loose connectors have their own counted package.
Our quote separates straight material, cut pieces and added fabrication. The quantity basis, packing arrangement and destination terms stay with the specified UPE order.
The widths and thicknesses differ between the two series, producing different unit masses. Compare the exact profile rows and their connection dimensions when reviewing a proposed change.
The rolled root, bolt location, nut dimensions and fastening-tool envelope define the usable space. The connection drawing coordinates those dimensions with the selected hole diameter.
UPE is an open channel section. Load position, restraint and connection details determine its torsional behavior in the designed assembly.
Yes. The drawing and part marks identify each opening direction and reference end. Mirrored hole patterns or attached parts remain distinguishable through preparation and packing.
The drawing states the required clearance and the coating stage at which it is accepted. Final fit considers the actual coated mating surfaces and any specified masking or finishing work.
Yes. Raw lengths, prepared pieces and assembled members retain separate item descriptions, marks and quantities on the quote and packing list.
Other items in the same product category.
We wrote these for buyers specifying and receiving exactly this kind of package.
Send the UPE sizes, grade, finished lengths and quantities. Include the drawing for holes, mating clearances or assembled pairs so our quotation identifies the supplied work.